Geekcreit DIY Mini Electronic Tesla Coil Kit, 15-24VDC 2 Amps
$4.44
In stock
Only 1 left
SKU
MINI TESLA COIL
- Buy 2 for $4.35 each and save 2%
- Buy 3 for $4.22 each and save 5%
Brand | Geekcreit |
---|---|
Manufacturer Part Number | 987884-25752874 |
Contents | Two 10K Ohm Resistors Two 2K Ohm Resistors One TIP41 Transistor Two 3mm LEDs One High Voltage Coil One 3.5mm Audio Jack One '105' Tantalum Capacitor One 1uF Capacitor One IRF530 MOSFET One Wire One 5x2.1mm DC Jack Two Heatsinks Four Standoffs and Screws One Circuit Board |
Input Voltage | 15-24VDC 2 Amps |
Circuit Board Size | 3.00" x 1.58" 0.055" Thickness |
Warnings | >Danger: High Voltage! >Heatsinks are too small for heat generated by the transistors - Short run times strongly recommended. >Assembled/Partially Assembled kits CANNOT be returned! |
Notes | >The direction that the red wire is wrapped around the coil matters! If your unit does not function, try reversing the direction! (try CW from wire connection near LEDs) >Most old laptop power supplies will work to power this unit. (check voltage output!) >Directions are in Chinese! >Helpful notes are available to download from Frits Buesink - 'Tesla Plasma Speaker Project' >This is a DIY (Do-it-Yourself) Kit. You will have to assemble and solder this project. >No, we cannot help you troubleshoot problems with this kit. |
UPC | N/A |
Country of Origin | China |
Notes | New. |
Location | Y1-29 |
Country of Manufacture | China |
---|---|
Color | Multicolor |
Manufacturer | Geekcreit |
Material | Aluminum, Brass, Copper, Fiberglass, Plastic, Steel |
Voltage | 18VDC, 24VDC |